How To Clean A Roomba Filter

Until those smart, tidy Roombas learn to clean themselves, information technology'south up to united states humans to go along them running at peak functioning.

Fifty-fifty later on a few short cleaning cycles, droppings like dust, dirt, hair, and fur can begin to take a toll on your Roomba. For starters, the vacuum works less efficiently, and also much buildup can as well put harmful strain on the unit's battery.

Now playing: Watch this: Go along your Roomba running in tip-superlative shape

ii:58

After each cleaning cycle...
The most bones level of maintenance should be washed afterwards each cleaning wheel to articulate out the grime that builds up the most.

First by emptying the dust bin. But before you put it back, remove the two filters located inside. These are essential for catching dust and should be replaced every month or so, depending on how often you vacuum. But, if you're willing to put your junior MacGyver hat on, you can delay replacing those filters.

The easiest way to clean these filters is by simply tapping them on the side of a trash tin can to knock out any droppings. If yous accept a few extra minutes, however, you can apply compressed air to blow out any caught droppings.

For an fifty-fifty deeper cleaning, wash the filters using water. Merely, you've been warned: practice not put the filters back in the Roomba until they're completely dry. Putting them back before they're completely dry can permanently damage your robot. (Then you're back to the dreaded stand-up vacuum.)

Once a week...
Every Sunday -- or whenever you find a few actress minutes -- comport midlevel maintenance.

First, remove the brushes and their bearings. So, use a rummage or i of the provided cleaning tools to pull out hair and fur that may be slowing the Roomba's motor downward. Remove debris from the bearings as well.

Your vacuum'southward front cycle also needs attention. With a little tug, remove information technology from its housing, and clean out any debris. You'll often find hair stuck here.

Once a calendar month...
Once a month, detox your Roomba with a slightly more than in-depth cleaning. For this role, you'll need a screwdriver.

Brainstorm past removing the spiral that secures the spiral brush, and clean out whatever debris caught below. Ready the brush and its spiral aside.

Then remove the four screws that secure the encompass -- ii on the battery door, and two by the big wheels (they should be marked with arrows). Once they're out, you'll be able to remove the comprehend. Immediately, y'all'll detect your robot'southward been hoarding debris in its inner parts.

To clean out this surface area, use compressed air, or a dry dustcloth. When you're done, supervene upon the cover and spiral brush, and replace and tighten those screws.